Image of Sarah PE

Sarah PE

Lead Process Engineer @ TRF Energy Solutions

Senior Process Engineer at MMR Consulting Inc.

Morrisville, North Carolina

Ranked #252 out of 5,032 for Lead Process Engineer in North Carolina

Section title

Sarah PE's Email Addresses & Phone Numbers

Sarah PE's Work Experience

TRF Energy Solutions

Lead Process Engineer

2014 to Present

Houston, Texas Area

CDI Engineering

Lead Process Engineer

2014 to 2014

Houston, Texas Area

Fluor

Process Engineer

2012 to 2014

Sugarland, TX

Sarah PE's Education

Cornell University

Master of Science (MS) Chemical Engineering

2009 to 2010

Dalian University of Technology

BS Process control and engineering

2005 to 2009

Sarah PE's Professional Skills Radar Chart

Based on our findings, Sarah PE is ...

Leader
Innovative
Questioning

What's on Sarah PE's mind?

Based on our findings, Sarah PE is ...

56% Left Brained
44% Right Brained

Sarah PE's Estimated Salary Range

About Sarah PE's Current Company

TRF Energy Solutions

Longview Power Plant Explosion Investigation, Longview, West Virginia Performed Root Cause Analysis for Longview Power Plant Explosion. Identify undersized PSV for the LNG Vaporizer and accelerated corrosion developed between two flange faces due to improperly installed seal. Colorado Gas Process Plant Fire Investigation, Denver, Colorado Performed Root Cause Analysis for Colorado Gas Process Plant Fire. Identify glycol...

Frequently Asked Questions about Sarah PE

What company does Sarah PE work for?

Sarah PE works for TRF Energy Solutions


What is Sarah PE's role at TRF Energy Solutions?

Sarah PE is Lead Process Engineer


What is Sarah PE's personal email address?

Sarah PE's personal email address is s****[email protected]


What is Sarah PE's business email address?

Sarah PE's business email addresses are not available


What is Sarah PE's Phone Number?

Sarah PE's phone (704) ***-*238


What industry does Sarah PE work in?

Sarah PE works in the Oil & Energy industry.


About Sarah PE

📖 Summary

M.S., Chemical Engineering. B.S., Process Equipment Control Engineering, Chemical Engineering Licensed Professional Engineer #114605 Over Seven years of diversified international experience in the Engineering sector. Well-qualified to contribute in advanced Process Engineering environment from large, medium to small plant Expertise in Gas Processing, Troubleshooting Process Equipment and Incident Investigation. Proven capacity in initiating and implementing effective engineering projects. Adept in Heat recovery, Crude oil treatment, Produced water treatment, Relief System and condensate stabilization. Record of promotion to assignments of increasing authority and responsibility. Knowledgeable in full-life-cycle project and staff management. Skilled presenter and facilitator. Effectively interact with diverse groups and professionals at all levels. Well-organized multi-tasker with strong detail orientation. Proficient in HYSYS, ProMax, ASPEN PLUS, PRO II, HTRI, ASPEN EDR, ASPEN PIMS, Pipesim, OLGA, PVTSim, FlowManager, PLC, Matlab, C++ and ColorQuest. Published author (see below). Troubleshoot Process Equipment and Incident Investigation. Retained to develop design basis, conceptual and advanced process design and feasibility study/simulation. Demonstrated capacity in computer aided simulators including HYSYS, ASPEN PLUS and PRO Max to calculate heat/mass balances and physical properties. Aided in API, ASME, NFPA, ASTM Standards and European Codes. Initiated Process Flow Diagrams (P.F.D.), Piping Instrumentation Diagram (P&ID) and defined control strategy. Gained solid thermal design/sizing background for heat transfer equipment. Successful in plant commissioning, HAZOPs and PHAs for multiple processes.Lead Process Engineer @ Longview Power Plant Explosion Investigation, Longview, West Virginia Performed Root Cause Analysis for Longview Power Plant Explosion. Identify undersized PSV for the LNG Vaporizer and accelerated corrosion developed between two flange faces due to improperly installed seal. Colorado Gas Process Plant Fire Investigation, Denver, Colorado Performed Root Cause Analysis for Colorado Gas Process Plant Fire. Identify glycol mist in fuel gas feeding to the engine through gas nozzle and form sparkle cells. Also Glycol is heavier than fuel gas and reacts with oxygen, causing no sufficient reaction with fuel gas. Identify there was no LSH to shutoff inflow to the flare gas scrubber causing ignited liquid spilled over. Saved 5 Million dollars for future damage. Successfully Shutdown and Start Up Gas Processing Plant, Williston, North Dakota Provided cost effect solutions, slashed 2 million dollars cost and increased production by 45%. Troubleshoot compressor malfunction, modify impellers to increase production, save 2 million dollars. Solved Operational Freeze up problems by adding flameless heaters to liquid dump valves. Slashed 0.5 million dollars. Provided comprehensive solutions to prevent leak, back flow, gas blow by, etc. Troubleshooting stabilizer flooding problems. Slashed 1 million dollar cost and increase 20% production. Provided Comprehensive Acid gas Treating solutions to Permian and Eagle Ford Formation. Provided Optimized Dehydration solutions to Bakken, Permian, and Eagle Ford Formation. From 2014 to Present (1 year) Houston, Texas AreaLead Process Engineer @ CDI Corporation, Houston, TX 2014- Present Process Engineer Played key role in eight projects: Kinder Morgan, Export Terminal, Pasadena, TX Tasked to construct a new terminal facility at the site of the old Pasadena Texas HL&P power plant site Kinder Morgan, Eaglebine Project, PSV UpGrade -2014, Huntsville, TX Tasked to install Amine plant, TEG plant, NGL plant, VRU and Sales Compression Unit and Delivered PSV sizing for the whole Gas processing plant. Retained for process studies covering from Amine Flare header design, Glycol Flare header deign to Process Flare header design. Kinder Morgan, Yoakum Compressor Station, Huntsville, TX Performed comprehensive PSV checking for Yoakum Compressor Station KMYY, Sino 2014 Silane FBR Granular Polisicon Aided in front-end engineering for a 1,000 MTPY Fluid Bed Reactor, a third-generation solar technology. Developed Heat& Material Balance. Facilitated Process Description, Process Control & Safety Interlock Huntsman, Reactor Upgrade, Conroe, TX Retained for process studies of Polyol Reactor upgrades. Developed Equipment list Huntsman, E6 OSP Diversification Project, Port Neches, TX Assisted to add three new product storage tanks and one new raw material storage tank, with agitators and pumps, etc. Delivered Calculations and datasheets for PVRVs, Tanks, Pumps, Thermal reliefs Solvay USA, Solvay DAWN Project, Pasadena, TX Assisted to build and operate a large-scale alkoxylation unit in Pasadena, Texas. Performed comprehensive PSV checking for Solvay DAWN Project BASF, VTA Skid Installation, Freeport, TX Retained for process studies covering alternative configurations to recovery heat in Crystallization Sterol Plant and Performed Heat exchanger sizing From 2014 to 2014 (less than a year) Houston, Texas AreaProcess Engineer @ Sasol North America, Inc. Fluor GC Sasol Lake Charles Cracker - FS/E, Lake Charles, Louisiana, United States • Aided in front-end engineering for a 1500 kTA ethane cracker and five derivative units (LDPE,LLDPE, EO/MEG, Guerbet, Ziegler, ETO). PEMEX-Fluor Salamanca Refinery Expansion, Salamanca, Guanajuato, Mexico • Retained for Alternative refinery modification and expansion concepts for an existing refinery Exxon neftegas limited Odoptu OS2 Sakhalin, Russia Optimize Dehydration Unit for Gas Lift System Analyze Design parameters BP-Husky Refining LLC Toledo Refinery Small Projects Toledo, Ohio, United States Projects include process studies to consider alternative configurations for a major expansion to handle crude from Canada, as well as economical alternative configurations for processing . Acid gas treating and troubleshooting and debottlenecking amine system. Crude Vacuum unit optimization Marathon Petroleum Company FCCU Flue Gas Reliability Study Garyville, Louisiana, United States Install parallel natural gas lines to the refinery fuel gas mix drums to support an increase of purchased natural gas needed to maintain fuel gas system balance. Ensure stable operation of furnaces and modify burners as needed due to the fuel gas composition change to all natural gas. BG Group NGL Marine Export Facility Study Lake Charles, Louisiana, United States The feasibility of installing an NGL Marine Export Facility to export propane available from the Dixie Pipeline will be studied to determine the configuration and cost of the facility as well as the assessment of two available sites to determine the recommended site. ConocoPhillips ULSD Project Lake Charles, Louisiana, United States ConocoPhillips intended to increase distillate hydrodesulfurization (HDS) treating capacity at the Lake Charles Refinery to meet EPA Ultra Low Sulfur Diesel (ULSD) regulations for on-road and off-road diesel products. From 2012 to 2014 (2 years) Sugarland, TXFacility Engineer @ Helix Project Detail design engineering for the topsides production facilities of the HP-1 Floating Production Unit for Helix Energy Solutions. Develop PFDs and plan platform layouts. Designed and sized the pressure vessels. Set up the HP & LP flare system and perform the radiation zone calculation and PSV sizing. Specify Compressors. Sized and designed the flare system (includes the Flare header, Flare tips and Flare boom, etc.) Design dehydration Unit. Generate the H & M balances, the PFD and P & IDs’. Castor Project Mediterranean Sea, offshore Spain Develop the sizing methods and program to size the pressure vessels, Line sizing, compressor sizing, Relief Valve sizing, design produced water treating system, Glycol dehydration Unit, size heat exchanger, line heater, acid gas treating, crude oil treating. Sized and designed the flare system (includes the Flare header, Flare tips and Flare stack, etc.) From 2011 to 2012 (1 year) Houston, Texas AreaChemical Engineer @ Evaluated organic/inorganic compounds for chemical and physical properties, composition, structure, relationships, and reactions. Optimize methods of polymerization including Bulk Polymerization, solution polymerization, Suspension Polymerization, and emulsion polymerization. Increase yield by 25% Gained experience in use of chromatography, spectroscopy, and spectrophotometry while upgrading equipment, formulas, processes and analytical methods. Develop formulas for anti-glare, anti-fog, abrasion resistance, and chemical resistance coatings and analyze the results in order to improve formula and assign projects to technicians. Apply RCA, steel wool, taber test, pencil hardness, boiling water test, adherence test to test the performance of the coatings. From 2010 to 2011 (1 year) Engineer @ Troubleshooting Ketone Benzene production processes. Designed the heat exchanger with HTRI. Analyzed the possibility of influent factors of operational rectification tower and investigated the influencing parameters. Design Sieve Tray Extraction Columns. From 2008 to 2009 (1 year) Master of Science (MS), Chemical Engineering @ Cornell University From 2009 to 2010 BS, Process control and engineering @ Dalian University of Technology From 2005 to 2009 Sarah PE is skilled in: AutoCAD, Matlab, C++, Visual Basic, Aspen Plus, PLC, Engineering, Gas Lift, Dehydration, Amine Treating, Refinery, Offshore Operations, Onshore, Upstream Processing, Midstream, Downstream Oil & Gas, LNG, NGL, Catalyst, Line Sizing, Heat Transfer, Heat Exchangers, Pumps, Compressor, Valves, PSV, Flare, System Safety, HAZOP, Crude, Water Treatment, P&ID development, PFD, Promax, Aspen HYSYS, Topsides, Petroleum, P&ID, HAZOP Study, Process Engineering


Sarah PE’s Personal Email Address, Business Email, and Phone Number

are curated by ContactOut on this page.

10x your recruitment & sales conversations

Contact over 200M professionals
instantly by email or phone. Reveal
personal & work email addresses, as
well as phone numbers accurately with
our ContactOut Chrome extension.

In a nutshell

Sarah PE's Personality Type

Introversion (I), Intuition (N), Thinking (T), Judging (J)

Average Tenure

1 year(s), 2 month(s)

Sarah PE's Willingness to Change Jobs

Unlikely

Likely

Open to opportunity?

There's 92% chance that Sarah PE is seeking for new opportunities

Sarah PE's Social Media Links

/profile.p...

Sarah PE's Achievements

Professional Engineer

Issued by Texas Board of Professional Engineers · May 2013

Engage candidates 10x faster

Enjoy unlimited access and discover candidates outside of LinkedIn

Trusted by 400K users from

76% of Fortune 500 companies

Microsoft Nestle PWC JP Morgan Merck Rackspace WarnerMedia Randstad Yelp Google

The most accurate data ever

CCPA Compliant
GDPA Aligned
150M Personal Emails
300M Work Emails
50M Direct Dials
200M Professional Profiles
30M Company Profiles

Hire Anyone, Anywhere
with ContactOut today

Making remote or global hires? We can help.

  • 50 contacts/month
  • Works on standard LinkedIn only
  • Work emails, personal emails, mobile numbers
* 1 user per company limit

No credit card required

Try ContactOut for Free