Image of JJ Neerman

JJ Neerman

Manager Project Engineer

Manager Project Engineer at John Zink Hamworthy Combustion

Bixby, Oklahoma

Section title

JJ Neerman's Email Addresses & Phone Numbers

JJ Neerman's Work Experience

John Zink Hamworthy Combustion

Manager Project Engineer

Tulsa, OK

Victory Energy Operations, LLC

Project Manager

August 2015 to April 2017

Tulsa, Oklahoma Area

ON POINTE

Project Engineer

July 2014 to August 2015

bixby, oklahoma

JJ Neerman's Education

Tennessee Technological University

Bachelor's of Science, Chemical Engineering

2004 to 2007

Tulsa Union High School

High school diploma, general studies

1990 to 1994

JJ Neerman's Professional Skills Radar Chart

Based on our findings, JJ Neerman is ...

Structured
Results-driven
Self-critical

What's on JJ Neerman's mind?

Based on our findings, JJ Neerman is ...

52% Left Brained
48% Right Brained

JJ Neerman's Estimated Salary Range

About JJ Neerman's Current Company

John Zink Hamworthy Combustion

Frequently Asked Questions about JJ Neerman

What company does JJ Neerman work for?

JJ Neerman works for John Zink Hamworthy Combustion


What is JJ Neerman's role at John Zink Hamworthy Combustion?

JJ Neerman is Manager Project Engineer


What is JJ Neerman's personal email address?

JJ Neerman's personal email address is jj****[email protected]


What is JJ Neerman's business email address?

JJ Neerman's business email address is j****[email protected]


What is JJ Neerman's Phone Number?

JJ Neerman's phone (405) ***-*187


What industry does JJ Neerman work in?

JJ Neerman works in the Oil & Energy industry.


About JJ Neerman

📖 Summary

Manager Project Engineer @ John Zink Hamworthy Combustion Tulsa, OKProject Manager @ Victory Energy Operations, LLC Project Manager for Boiler execution projects (ranging from $1-MM to $10-MM). Upon handover from sales application engineer, the PM facilitates project execution through the various disciplines necessary and sufficient to complete a successful boiler system design and build. The project team consists of engineering (thermal, mechanical & structural), design & drafting, instrumentation & controls, purchasing & procurement, fabrication, QA/QC, shipping & receiving, transportation, and startup and commissioning support. As PM, my goal is to empower each discipline so they are well equipped to complete their tasks in support of accomplishing our common mission: provide a high quality product on time and under budget to a satisfied customer.In addition to communicating project specific information with the customer, I also managed suppliers. With both customers and suppliers, I worked to confirm scope, cost, production schedule, change requests, delivery, and installation services, as well as manage execution of each through the duration of the project. The primary objective with both is to minimize cost, mitigate scope creep, under promise, over perform, and improve project margin.At any given time I was able to balance 2 to 5 active projects at various stages in the execution cycle. From August 2015 to April 2017 (1 year 9 months) Tulsa, Oklahoma AreaProject Engineer @ ON POINTE Providing project engineering & management services for the oil and gas industry. Equipped to facilitate process engineering and project management for upstream, midstream and downstream applications. Developing proposals including RFP/RFQ and Scope review, cost estimate(s), terms and conditions, exclusions, exceptions, recommended services. Project Management including collaboration with client, development of project schedule, milestone(s) and deliverables, project engineering evaluation, delegation, oversight, and review, subcontractor/vendor coordination, field oversight and field execution management, documentation/reporting, and project closeout reporting. From July 2014 to August 2015 (1 year 2 months) bixby, oklahomaProcess Engineer @ CB&I Federal Services (formerly Shaw E&I Group) Worked specifically with DOE Client located in Aiken, SC, on Mixed Oxides Fuels Facility  Managed long-lead system procurements as Subcontract Technical Representative (STR); Generated scopes of work, developed Design Criteria, project schedule, procurement specs, developed and analyzed pre-qualified & approved bidders list, developed & evaluated Requests for Proposal (RFPs), Supplier’s Submittal Schedules, milestone payment schedules, witness & hold point inspections, personnel qualification requirements & site inspections Career Achievement Project – Proposed alternative solution to existing BRP design eliminating $4,000,000.00 capital cost; created list of, spoke with and/or visited thirty (30) chemical suppliers to consider new BRP design concept; gained managerial approval to move forward with new design initiative; developed, completed and presented new design package to client on time and under budgetPartnered with Fuels Group in Dallas, TX, to perform clean/inspect/repair projects on Above Ground Storage (AGS) tanks for the Defense Logistics Agency (DLA) Developed scopes of work, evaluated piping systems and fuel supply chain systems, conducted material take-offs, labor, material and equipment estimates, etc. From December 2008 to April 2014 (5 years 5 months) Knoxville, TNSystems Engineer @ B&W Y-12 LLC  Process design & evaluation of uranium dissolution, down blending, representative & remote liquid sampling techniques & transfers, glove-box exhaust filters with push through bag-out technology, and contaminated & non-contaminated floor cleaning operations, developed PFDs & P&IDs, system specifications, mass, energy & chemical balance calculations, prepared reports & presentations From May 2007 to October 2008 (1 year 6 months) Process Engineer @ Luvata Grenada Heatcraft  Designed, built prototype, tested, analyzed data, and installed Innovative Oil Application System on 47-fin presses Designed, built installed universal dip tank system; developed O&M documentation and training programs R&D’d proprietary copper tubing coating designed to prevent formicary corrosion on copper tubing; designed and built copper tubing coating application system Designed and built environmental testing simulator for analysis of proprietary coating Analyzed bottlenecking on coil assembly and brazing lines; optimized processes Evaluated and resolved cause of false positive results on coils in helium leak testing process Daily duties included: managing and maintaining 47-fin press operation; oil application analysis on pressed fin packs; laboratory research on proprietary coating and copper tubing analysis From December 2005 to December 2006 (1 year 1 month) Grenada, MSHERE & CCI Student Internships @ Oak Ridge National Laboratory  Developed simulation modeling steam-methane reformation for Hydrogen production, capture, and storage;  Developed feasibility for production of the Next Generation Spent Nuclear Fuel Storage Cask; developed PFDs, equipment and instrument lists, design criteria and materials, and evaluated production and labor costs From June 2003 to October 2004 (1 year 5 months) Oak Ridge, TNMechanical Technician @ Neerman Equipment Services  Serviced, maintained, and installed, highly precision German machinery including Heidelberg printing presses, cutters, folders, & other bindery equipment; systems technologies included pneumatic, hydraulic and electronic; coordinated vendors – electricians, plumbers, HVAC technicians, and rigging professionals From January 1990 to August 2000 (10 years 8 months) Tulsa, OK


JJ Neerman’s Personal Email Address, Business Email, and Phone Number

are curated by ContactOut on this page.

10x your recruitment & sales conversations

Contact over 200M professionals
instantly by email or phone. Reveal
personal & work email addresses, as
well as phone numbers accurately with
our ContactOut Chrome extension.

In a nutshell

JJ Neerman's Personality Type

Introversion (I), Sensing (S), Thinking (T), Perceiving (P)

Average Tenure

3 year(s), 3 month(s)

JJ Neerman's Willingness to Change Jobs

Unlikely

Likely

Open to opportunity?

There's 89% chance that JJ Neerman is seeking for new opportunities

JJ Neerman's Social Media Links

/company/j... /school/te...
Engage candidates 10x faster

Enjoy unlimited access and discover candidates outside of LinkedIn

Trusted by 400K users from

76% of Fortune 500 companies

Microsoft Nestle PWC JP Morgan Merck Rackspace WarnerMedia Randstad Yelp Google

The most accurate data ever

CCPA Compliant
GDPA Aligned
150M Personal Emails
300M Work Emails
50M Direct Dials
200M Professional Profiles
30M Company Profiles

Hire Anyone, Anywhere
with ContactOut today

Making remote or global hires? We can help.

  • 50 contacts/month
  • Works on standard LinkedIn only
  • Work emails, personal emails, mobile numbers
* 1 user per company limit

No credit card required

Try ContactOut for Free